Build Your Drift Pro RIM FS680
All wheels are 100% customizable at Light Bicycle. If your preferred specs are not listed, feel free to contact us ([email protected]) with your special requirements described.
RIM SPECS
TECH
Is it possible to get fatter and lose weight at the same time? Thanks to a lightweight single wall design, the FS680 rims save a pound of rotational weight compared to most alloy wheelsets, all while adding lateral stiffness. Weighing in at just 500g per rim, you’ll drop a significant amount of rotational weight from your fatbike without compromising strength or stiffness.
Example Wheelset Build: ONLY 1700G! Rims: FS680 Hubs: Tune Fat King/Fat Kong Spokes: Sapim CX-RAY Nipples: Sapim Polyax Secure Lock
Each wheel from Light Bicycle is built using the best industry practices by professional builders, ensuring your investment stands the test of time.
Tech Notes: 1. Bladed spokes or Sapim D-Light's are recommended for the FS680 wheelset. DT Swiss Comp Race or Revolution spokes stretch out too easily and would cause a poor wheel build with a single wall rim. 2. Use nipples with a standard head or Sapim Hex nipples only. Nipples with a tall head will cause an issue with the tubeless tape. 3. DO NOT use tire levers to install a tire or to unseat a tire on FS680 rims. The wall thickness is quite thin just past where your tire sits, and you may damage this area by prying on it!
WARRANTY
For Non-Pro Series Rims: From the date of purchase, 3-year Standard Warranty.
For Pro Series Rims: From the date of purchase, 5-year Pro Warranty as standard and an upgraded optional lifetime Premium Warranty with minimum charge.
Crash Replacement: It is applicable with the same period as the warranty time range that you purchased for the rims with 10% /25% discount for Non-Pro series /Pro series.
WHAT IS IN THE BOX
Is it possible to get fatter and lose weight at the same time? Thanks to a lightweight single wall design, the FS680 rims save a pound of rotational weight compared to most alloy wheelsets, all while adding lateral stiffness. Weighing in at just 500g per rim, you’ll drop a significant amount of rotational weight from your fatbike without compromising strength or stiffness.
Example Wheelset Build: ONLY 1700G! Rims: FS680 Hubs: Tune Fat King/Fat Kong Spokes: Sapim CX-RAY Nipples: Sapim Polyax Secure Lock
Each wheel from Light Bicycle is built using the best industry practices by professional builders, ensuring your investment stands the test of time.
Tech Notes: 1. Bladed spokes or Sapim D-Light's are recommended for the FS680 wheelset. DT Swiss Comp Race or Revolution spokes stretch out too easily and would cause a poor wheel build with a single wall rim. 2. Use nipples with a standard head or Sapim Hex nipples only. Nipples with a tall head will cause an issue with the tubeless tape. 3. DO NOT use tire levers to install a tire or to unseat a tire on FS680 rims. The wall thickness is quite thin just past where your tire sits, and you may damage this area by prying on it!
-
Overview
Is it possible to get fatter and lose weight at the same time? Thanks to a lightweight single wall design, the FS680 rims save a pound of rotational weight compared to most alloy wheelsets, all while adding lateral stiffness. Weighing in at just 500g per rim, you’ll drop a significant amount of rotational weight from your fatbike without compromising strength or stiffness.
Example Wheelset Build: ONLY 1700G! Rims: FS680 Hubs: Tune Fat King/Fat Kong Spokes: Sapim CX-RAY Nipples: Sapim Polyax Secure Lock
Each wheel from Light Bicycle is built using the best industry practices by professional builders, ensuring your investment stands the test of time.
Tech Notes: 1. Bladed spokes or Sapim D-Light's are recommended for the FS680 wheelset. DT Swiss Comp Race or Revolution spokes stretch out too easily and would cause a poor wheel build with a single wall rim. 2. Use nipples with a standard head or Sapim Hex nipples only. Nipples with a tall head will cause an issue with the tubeless tape. 3. DO NOT use tire levers to install a tire or to unseat a tire on FS680 rims. The wall thickness is quite thin just past where your tire sits, and you may damage this area by prying on it!
-
Specs
-
Tech
-
Warranty
-
In The Box
Gallery
Light Bicycle : Rims: FS680 Matte UD 32H Centered Drilling (Staggered)
Hubs: Industry Nine Hydra Blue 15/150mm 12/197mm J-bend 6-bolt 32H Enduro Brand 690T Sram XD Alloy
Spokes: Sapim CX Ray Black J-bend
Nipples: Sapim Aluminium Blue Universal External
Scott : FS680 is the second set of wheels I've purchase from you - these are the photos of both sets (first set: RSNOW02).
UK(Britain)
Kim : I Received a pair of FS680 with Hope Fatsno hubs a few weeks ago to go on my Diamant fat bike , they are very true and nicely finished, have only done 2 rides so far, one a nice flowing single track and the other a rough as fire trail, so far so good, very happy
Australia
Light Bicycle : FS680 matte UD 32H centered 3 Years
FS680 matte UD 32H centered 3 Years
HUB-F Onyx 15 / 150mm J-bend 6-bolt Anodized-Orange 32H Ceramic
HUB-R Onyx 12 / 197mm Sram XD Steel J-bend 6-bolt Anodized-Orange 32H Sprag Clutch Ceramic
SPOKE Sapim CX Ray Black J-bend uncertain
NIPPLE Sapim Aluminium Orange Polyax External
COMMENTS
M
Mike 2019/02/04
LightBicycle 2019/02/05
REPLY
Please leave your name here.
E-mail is required for further contact.
Please enter a message.
G
Gregorio 2018/12/14
LightBicycle 2018/12/15
REPLY
Please leave your name here.
E-mail is required for further contact.
Please enter a message.
M
Marc 2018/10/09
LightBicycle 2018/10/10
REPLY
Please leave your name here.
E-mail is required for further contact.
Please enter a message.
Get in touch
Feel free to leave a comment if you have any questions or suggestions on our products or other issues.
Please leave your name here.
E-mail is required for further contact.
Please enter a message.